HP StorageWorks 2.32 Edge Switch - Manual (Page 96)

Configuring SAN Products and Fabrics
96 HA-Fabric Manager User Guide
Managing Products
You can use the application to manage discovered products. You can search for a
product, change its properties, and perform other configuration and maintenance
tasks.
Opening a Product’s Element Manager
You can open an Element Manager to manage switches and directors directly
from the application.
Opening the Element Manager from the Interface
To open an Element Manager from the user interface, perform one of the
following steps:
■ Right-click a product icon and choose Element Manager.
■ Double-click a product icon.
Note: If you encounter problems, ensure that only one copy of the application is being
used to monitor and manage the device. Only one copy of the application should be
used to monitor and manage the same devices in a subnet.
Opening the Element Manager from the Command Line
To open an Element Manager, you can use a script that is included with the
application. In order to do this, the appliance must be running and the product
must be discovered.
1. Open the script <Install_Home>\bin\HAFM_ElementMgr.bat
using a text editor.
2. Under the heading, “rem HAFM Element Manager”, find the line that begins:
...ElementManagerStandAlone -s ServerIp -p ProductIp -u UserName
-pw Password
3. Enter information for the following parameters, ensuring that there are spaces
between the options:
■ ServerIp: Appliance’s IP address
■ ProductIp: Switch’s or director’s IP address
■ UserName: User login name