HP StorageWorks 2.32 Edge Switch - Manual (Page 257)

Configuring Remote Workstations
257 HA-Fabric Manager User Guide
Configuring Solaris Systems
This section describes the procedures for installing HAFM on a remote Solaris
workstation.
Requirements
The download and installation process requires the use of a workstation with the
following minimum system requirements:
■ Solaris version 7.0
■ UltraSPARC-IIi processor
■ 512 megabyte (MB) random access memory (RAM) memory
■ 350 MB available disk space
■ Video card supporting 256 colors at 800 x 600 resolution
■ Network connection
■ Internet browser, such as Microsoft Internet Explorer (version 4.0 or later) or
Netscape Navigator (version 4.6 or later)
Newer versions of the HAFM or Element Managers installed on the HAFM
appliance automatically download when the remote clients log in to the appliance.
Installation Procedure
To install the HAFM on a remote workstation:
1. Open a World Wide Web (WWW) browser.
2. Type the address of the HAFM appliance in the Location (or Address) field
of the browser, then press Enter.
Obtain the HAFM appliance address from your network administrator
The HP StorageWorks HAFM page displays. Figure 111 illustrates a partial
page with the Windows installation section.
3. On the page, click Begin Solaris Installation to begin the installation
process. If you have read the security agreement information and wish to
continue, click Yes. The HP High Availability Fabric Manager Available
Installers page displays, as shown in
Figure 112 .