HP LaserJet M9040M9050 Multifunction Printer series User Manual
Page 185
2.
Open the front cover of the MFP, rotate the green lever downward to the unlocked position, and
remove the print cartridge.
Figure 11-3
Clean the paper path (2 of 6)
CAUTION:
To prevent damage to the print cartridge, use two hands when removing it from the
MFP. Do not expose the print cartridge to light for more than a few minutes. Cover the print cartridge
when it is outside of the MFP.
NOTE:
If toner gets on your clothes, wipe it off with a dry cloth, and wash your clothes in cold
water. Hot water sets toner into fabric.
3.
With a dry, lint-free cloth, wipe any residue from the paper path area, the registration roller, and
the print cartridge cavity.
Figure 11-4
Clean the paper path (3 of 6)
4.
Replace the print cartridge.
Figure 11-5
Clean the paper path (4 of 6)
5.
Rotate the green handle into the locked position.
Figure 11-6
Clean the paper path (5 of 6)
ENWW
Clean the MFP 171