HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 195)

Printer maintenance kit
NOTE: The printer maintenance kit is a consumable and is not covered under warranty.
To ensure optimum print quality, HP recommends that a new printer maintenance kit be installed
approximately every 350,000 pages. Depending on how you use the MFP, you might need to replace
the kit more often. If you have questions about how frequently you should replace the printer
maintenance kit, contact the support center at
www.hp.com/support/ljm9040mfp or www.hp.com/
support/ljm9050mfp .
When the Replace maintenance kit message appears on the control panel, you need to purchase a
printer maintenance kit and install the new parts. The part number for the 110V kit is C9152A. The part
number for the 220V kit is C9153A. The printer maintenance kit contains two Type 1 rollers, seven Type
2 rollers, one transfer roller assembly, and one fuser assembly. Complete instructions for installing the
kit components are included in the printer maintenance kit box.
ENWW Printer maintenance kit 181