HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 99)

Load paper and print media
This section contains information about loading standard- and custom-size media into the four input
trays.
CAUTION: To avoid a jam, never add or remove paper from tray 1 or open tray 2, tray 3, or tray 4
while printing or copying from that tray. To avoid damaging the MFP, print labels, envelopes, and
transparencies from tray 1 only. Send labels, envelopes, and transparencies to the upper bin. Print on
only one side of labels, envelopes, and transparencies.
Load tray 1
Tray 1 holds up to 100 sheets of paper or 10 envelopes. For more information about supported media,
see
Supported paper and print media sizes on page 81 .
1. Open tray 1.
Figure 6-1 Load tray 1 (1 of 3)
2. Load paper according to size and finishing options.
Figure 6-2 Load tray 1 (2 of 3)
CAUTION: To avoid jams, print sheets of labels one sheet at a time.
3. Adjust the paper guides so they lightly touch the paper stack, but do not bend the paper.
Figure 6-3 Load tray 1 (3 of 3)
4. Make sure the paper fits under the tabs on the guides and not above the load level indicators.
ENWW Load paper and print media 85