HP StorageWorks 500 Modular Smart Array - Manual (Page 57)

Hardware Options Installation
HP StorageWorks Modular Smart Array 500 System User Guide 3-13
5. Install the controller.
1
2
6. Power up the system. Refer to “System Power Up” in Chapter 2, “Installation
and Operation”.
7. Verify that the controller is seated properly by observing the controller LEDs.
When seated properly, the LEDs illuminate when the system is powered.
DC Power Supply Option
The DC power supply procedure provides instructions for converting an existing AC
power supply configuration to a DC power supply configuration.
Observe the required safety guidelines for DC power supply installation.
WARNING: A risk of personal injury from electric shock and hazardous energy
levels exists. The installation of options and routine maintenance and service
of this product must be performed by individuals who are knowledgeable
about the procedures, precautions, and hazards associated with DC
power products.