HP StorageWorks 500 Modular Smart Array - Manual (Page 74)

Configuration and Utilities
HP StorageWorks Modular Smart Array 500 System User Guide 4-11
Custom Configuration
Custom configuration allows you to create arrays and assign fault tolerance one array
at a time. To custom configure an array:
1. Go to the Main Configuration View screen.
2. Highlight the controller, array, or logical drive to be configured.
3. Make a selection from the Options menu located on the right side of the screen.
The following figure shows the controller highlighted on the left side of the
screen and Controller Options menu on the right side of the screen.
4. Use online help for on completing configurations. The following sections discuss
CPQONLIN functions.