4 settings needed after hdlm uninstallation – HP Hitachi Dynamic Link Manager Software User Manual
Page 283
3. Creating an HDLM Environment
261
Figure 3-31: Configuration Example (After Uninstallation)
In this configuration example,
/dev/dsk/c2t50060E8010027A82d0s2
and
/dev/
dsk/c2t50060E8010027A82d1s2
are
sd
or
ssd
devices.
3.17.4 Settings Needed After HDLM Uninstallation
(1) VxVM Settings
When using VxVM, execute the following command to confirm that the
DEVICE
column of the LUs previously managed by HDLM is displayed in the
c
W
t
X
d
Y
s
Z
format (for example, c6t0d10s2):
# vxdisk list
If the value is displayed in the
c
W
t
X
d
Y
s
Z format, perform the following procedures:
1.
Delete the
/etc/vx/disk.info
file.
2.
Restart the host, or restart the VxVM configuration daemon by executing the
following command:
# vxconfigd -k
In HDLM 05-00 or later, VxVM disk groups that were used with HDLM devices can
still be used after uninstallation. To use such disk groups, perform the following
procedure after uninstalling HDLM.
To use VxVM's disk groups that were used with HDLM devices in HDLM 05-00 or