HP Hitachi Dynamic Link Manager Software - Manual (Page 577)

8. Messages
555
Details
The host will restart because restart was specified in the installation information
settings file.
Action
None.
KAPL09241-W
An attempt to install an HDLM component failed. Error Code =
aa...aa
Details
An attempt to install an HDLM component failed.
aa...aa: Error number (decimal number) that specifies the executed processing
Action
Depending on the output error code, take the appropriate action as shown below.
Note that this requires no particular action, because HDLM operation is not
affected when linkage with Global Link Manager is not used.
If the error code is 3 or 100:
Wait a while, and then execute the HDLM component installation utility
(
dlminstcomp
).
If the error code is 5:
Install the prerequisite JDK, and then execute the HDLM component
installation utility (
dlminstcomp
).
If the error code is other than the above:
Contact your HDLM vendor or your maintenance company if you have a
maintenance contract for HDLM.
KAPL09242-E
No usable JDK or JRE exists.
Details
The prerequisite JDK is not installed on the system.
Action
Install the prerequisite JDK, and then execute the HDLM component installation
utility (
dlminstcomp
).
KAPL09243-I
dlminstcomp completed successfully.
Details