HP Hitachi Dynamic Link Manager Software User Manual
Page 133
Displayed Item
Description
No
summary
displayed
Summary
displayed
Indicates that an intermittent error occurred (automatic
failbacks do not check the path) (the path status is
Offline(E)).
HBAPortWWN
#1
-
A 16-digit hexadecimal number indicating the WWN
information for an HBA connected to the storage system.
This item is displayed only when you specify the -
hbaportwwn parameter or when you specify hbaportwwn for
the -item parameter.
VmRuntimeN
ame
#1
-
Displays the runtime information for paths managed by
VMware vSphere in path information fields. If you specify
the -vmruntimename parameter together with the -path
parameter, this information is displayed instead of the
PathName item.
VmState
#1
-
The path status managed by VMware vSphere. This item is
displayed only when you specify the -vmstate parameter or
when you specify vmstate for the -item parameter.
•
active: Online
•
standby: Online
•
off: Offline status caused by a command operation
(Offline(C))
•
dead: Offline due to an error (Offline(E))
•
unavailable: Offline due to an error (Offline(E))
•
perm_loss: Offline due to an error (Offline(E))
Paths that are dead, unavailable, or perm_loss require
corrective action. The appropriate action can be determined
What To Do for a Path Error on page 5-2
VmPathUID
#
1
-
The UID of the path managed by VMware vSphere. This
item is displayed when specified in a value of the -path -
item parameter.
Legend:
- : Not displayed
#1
The path information is displayed only when a value is specified for the -
path -item parameter.
#2
This storage system applies when the dynamic I/O path control function is
disabled.
Command Reference
6-41
Hitachi Dynamic Link Manager User Guide for VMware
®