HP Hitachi Dynamic Link Manager Software User Manual
Page 135
To display LU information
-lu
When neither the -c nor -item parameter is specified with the -lu
parameter, the information about the LU recognized by HDLM is displayed
without selecting items to be displayed or displaying a summary. The
sorting key is iLU and its configuration information is displayed for each
LU. By using the sub-parameter, -hdev or -pathid, you can filter the LU
information to be displayed. If you do not specify -hdev or -pathid, the
information about all LUs recognized by HDLM is displayed.
For details on the content of each displayed item, see
The sub-parameters are:
-hdev host-device-name
Displays information only for the paths accessing the specified host
device.
The host-device-name string is case-sensitive.
-pathid AutoPATH_ID
Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example
The following example shows how to display the LU information
without selecting items to be displayed:
PROMPT>dlnkmgr view -lu
Product : SANRISE_AMS
SerialNumber : 77010152
LUs : 1
iLU HDevName PathID Status
0191 t10.HITACHI_770101520191 000000 Online
000001 Online
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To display LU information (by adding items to be displayed)
-lu -item
The items specified with the -item option are displayed among with those
displayed by the -lu option.
When the value of the -item parameter is omitted or all is specified, all
the items, except for DPC, that can be displayed are displayed.
Command Reference
6-43
Hitachi Dynamic Link Manager User Guide for VMware
®