HP Hitachi Dynamic Link Manager Software - Manual (Page 137)

Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example 1
The following example shows the LU information displayed when
ChaPort, LB, VmPSP, VmRuntimeName, and VmState are specified as
additional display items:
PROMPT>dlnkmgr view -lu -item cp lb vmpsp vmruntimename
vmstate
Product : SANRISE_AMS
SerialNumber : 77010152
LUs : 1
iLU HDevName LB VmPSP PathID
VmRuntimeName ChaPort Status VmState
0191 t10.HITACHI_770101520191 exlio HTI_PSP_HDLM_EXLIO 000000
vmhba2:C0:T0:L0 1B Online active
000001
vmhba5:C0:T0:L0 0B Online active
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 2
When using Hitachi AMS2000 series, Hitachi SMS series , or HUS100
series storage and displaying LU information with DPC added to the
display items:
PROMPT>dlnkmgr view -lu -item dpc
Product : HUS100
SerialNumber : 9203008
LUs : 3
Dynamic I/O Path Control : on*
iLU HDevName DPC PathID Status
000006 t10.HITACHI_770101520191 on 000000 Online
000003 Online
000007 t11.HITACHI_770101520191 off 000001 Online
000004 Online
000008 t12.HITACHI_770101520191 on 000002 Online
000005 Online
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To display a summary of LU information
-lu -c
Command Reference
6-45
Hitachi Dynamic Link Manager User Guide for VMware ®