HP Hitachi Dynamic Link Manager Software User Manual
Page 140
Displayed item
Description
No summary
displayed
Summary
displayed
PathName
#1
-
The path name, which indicates a path. When
you modify the system configuration or replace a
hardware item, you should check the path
names to identify the path that will be affected
by the change. Path name consists of the
following four elements, separated by periods:
•
Host port number (hexadecimal number)
•
Bus number (hexadecimal number)
•
Target ID (hexadecimal number)
•
Host LU number (hexadecimal number)
For details about each element of the path name
and its representation in VMware vSphere, see
Table 6-10 Elements of a path name on page
ChaPort
#1
-
Port number of the CHA, which identifies the
CHA port that is mounted on the storage system.
You can identify an actual CHA port by
referencing this number from the storage system
management program.
CLPR
#1
-
The number of the CLPR to which the CHA
belongs, indicated by a number from 0 to 31.
Note that a hyphen (-) is displayed if the
following items are subject to display:
•
CHA ports in the storage system that do not
support the cache logical partition function
•
Paths connected to the Snapshot Image of
the Copy-on-write Snapshot of the Hitachi
AMS2000/AMS/WMS/SMS series
Status
-
Status of the path
•
Online: Online
•
Offline(C): Offline status caused by a
command operation
•
Offline(E): Offline due to an error
Paths that are in Offline(E) status require
corrective action. The appropriate action can be
determined by referring to
.
Type
#1
-
Attribute of the path
•
Own: Owner path
•
Non: Non-owner path
When connecting to Universal Storage Platform
V/VM series, Virtual Storage Platform series,
Hitachi AMS2000 series
#2
, Hitachi SMS series
#2
,
HUS100 series
#2
, or HUS VM, all paths are
owner paths.
6-48
Command Reference
Hitachi Dynamic Link Manager User Guide for VMware
®