HP Hitachi Dynamic Link Manager Software - Manual (Page 194)

Message ID Message Text Explanation
KAPL09181-I The aa...aa of HDLM version
bb...bb completed successfully.
Details
The unattended installation or
remove of HDLM has completed
normally.
aa...aa: installation or remove
bb...bb: Version number of the
installed or removed HDLM
Action
None.
KAPL09182-W An attempt to aa...aa HDLM
version bb...bb has failed.
See the previous messages to
resolve the problems.
Details
The unattended installation or
remove of HDLM failed.
aa...aa: install or remove
bb...bb: Version number of HDLM
you attempted to install or
remove
Action
See the previous warning and
error messages to resolve the
problems.
KAPL09187-W No parameter is specified. Details
No installation-information
settings file has been specified in
the installhdlm utility for
installing HDLM.
Action
Make sure that an actual
installation-information settings
file for the installhdlm utility is
appropriate, and then try again.
KAPL09188-W Too many parameters are
specified.
Details
Multiple parameters were specified
for the installhdlm utility for
installing HDLM.
Action
Make sure that the parameters for
the installhdlm utility is
appropriate, and then try again.
For details on the installhdlm
utility, see The installhdlm Utility
for Installing HDLM on page 7-8 .
KAPL09189-W The parameter contains an
incorrect value. (Value =
aa...aa)
Details
Either -f, -v, or -h must be
specified as the first parameter for
the installhdlm utility for
installing HDLM.
8-36
Messages
Hitachi Dynamic Link Manager User Guide for VMware ®