Automatic two-sided printing, Accessory – HP Deskjet 6988dt Printer User Manual
Page 160
●
The duplexer is attached to the printer.
●
The duplexer is
in the printer software.
●
The media type and size selected on the Paper/Quality tab are supported by the
duplexer.
For a list of supported media types and sizes, see the specifications for the duplexer:
–
Automatic Two-Sided Printing Accessory
–
Auto Two-Sided Print Accessory with Small Paper Tray
Only one side of the page prints when the two-sided printing option is enabled
Verify that the following conditions exist:
●
The
are set in both the printer software and the software
program that you are using.
●
The photo paper is not curled, if you are printing on two-sided photo paper. Photo
paper should be flat before printing. See
storing and handling photo paper
for more
information.
●
If the media type or size is not supported by the duplexer, you can print the document
by using the
manual two-sided printing instructions
The media type and size that is selected on the Paper/Quality tab are supported
by the
.
Note
Do not try to print a two-sided document on single-sided paper, such
as single-sided photo paper.
Binding margin is in the wrong place
1.
Open the
dialog box.
2.
Click the Finishing tab.
3.
Verify that the following conditions exist:
–
Flip pages up is not selected for binding along the side (book binding).
–
Flip pages up is selected for binding along the top (tablet binding).
For more information, see
Paper size changes when the two-sided printing option is selected
The paper size is not supported by the
Colors look faded
If the colors look faded, try printing the two-sided document by using the
.
Automatic Two-Sided Printing Accessory specifications
Dimensions when attached to printer
124.6 mm (4.9 in) tall x 320.5 mm (12.62 in) wide x 77.7 mm (3.06 in) deep
Skew (second side of printed page)
Plain paper: +/- .009 mm/mm (.009 in/in)
Chapter 12
158
HP Deskjet 6980 series