HP Deskjet 6988dt Printer - Manual (Page 44)

Parameter Description
Security The level of security set for the printer connected by
Bluetooth.
●
High: The printer requires a passkey from the
Bluetooth device before allowing the device to send a
print job to it.
● Low: The printer does not require a passkey. Any
Bluetooth device within range can print to it.
Tray Select Note If the optional 250-Sheet Plain Paper Tray
Accessory is not installed, the Tray Select options will not
appear.
● Upper Tray: Selects the upper tray as the paper
source.
● Lower Tray: Selects the lower tray as the paper
source.
Reset Bluetooth Resets Bluetooth to factory default settings.
●
Yes, reset Bluetooth: Resets Bluetooth to factory
default settings.
● No: Settings remain as they are.
Reset the printer to the factory default settings
After the printer is configured for a network, its configuration settings are saved in its
memory.
Resetting the printer to its factory default settings will clear all the settings from the
printer's memory for the network. This should only be done as a last resort when
troubleshooting the printer.
Resetting the printer to its factory default settings might require you to reinstall the printer
software. Additionally, you will also have to reconfigure the printer's security settings.
The printer's default settings are:
Option Default setting
Communication
Mode Ad hoc
Network Name
(SSID) hpsetup
Encryption None
Wireless Radio Off
EWS Administrator
password [blank]
Follow these steps to reset the printer to the factory default settings:
Chapter 4
(continued)
42 HP Deskjet 6980 series