HP Deskjet 6988dt Printer User Manual
Page 41
802.11 wireless
The 802.11 wireless information applies only to the printer's wireless connection:
Item
Meaning
Wireless Status
The printer's wireless network status:
●
Connected: The printer is connected to the wireless network.
●
Disconnected: The printer is not connected to the wireless
network.
●
Disabled: The wireless radio is off and the printer is connected
to an Ethernet network.
Communication
Mode
The communication mode to which the printer is configured.
●
●
Network Name
(SSID)
The
setting to which the printer is set.
Signal Strength
(1-5 highest)
The strength of the 802.11 radio signal the printer is receiving:
●
1 through 5: 5 indicates an excellent signal; 1 indicates a poor
signal.
●
Not applicable: The printer is set to
communication
mode or the wireless network is disabled.
Channel
One of several pre-set frequencies at which 802.11b-enabled
devices communicate in order to reduce interference.
The number of channels available varies by country/region.
Not applicable means that the wireless network is disabled.
Authentication
Type
The printer's
setting:
●
Open System: No authentication is being used.
●
Shared Key: The printer is using a WEP key for authentication.
●
WPA-PSK: Authentication that uses a Pre-Shared Key (PSK).
Used as part of
●
None: No authentication is in use.
Encryption
The printer's encryption setting:
●
64-bit WEP: Printer is configured with a five-character or 10-
digit WEP key.
●
128-bit WEP: Printer is configured with a 13-character or 26-
digit WEP key.
●
AES: An encryption method that can be used with WPA.
●
TKIP: An encryption method that can be used with WPA.
●
None: No encryption is being used.
Access Point
HW address
The MAC address of the
for the
printer's network. This setting applies only to
User's guide
39