HP Deskjet 6988dt Printer User Manual
Page 83
●
Avoid using labels that are sticky, wrinkled, or pulling away from the protective
backing.
●
Do not exceed the In tray capacity: 30 sheets of labels (use only Letter or A4-size
sheets).
Prepare to print
1.
Verify that the printer is turned on.
2.
Raise the Out tray, and then remove all paper from the In tray.
3.
Slide the paper-width guide all the way to the left, and then pull out the paper-length
guide.
4.
Fan the edges of the label sheets to separate them, and then align the edges.
5.
Place the label sheets in the In tray with the label side facing down.
6.
Push the sheets into the printer until they stop.
7.
Slide the paper guides firmly against the sheets.
8.
Lower the Out tray.
Note
If the software program includes a label printing feature, follow the
instructions that are provided with the software program. Otherwise, follow the
instructions below.
1.
Open the
dialog box.
2.
Click the Printing Shortcuts tab.
3.
In the What do you want to do? drop-down list, click General everyday
printing, and then specify the following print settings:
–
Paper type: Automatic or Plain paper
–
Paper size: An appropriate paper size
–
Paper source: Upper tray
4.
Select the following print settings as appropriate:
–
–
5.
Select any other print settings that you want, and then click OK.
Use the
to learn about the features that appear in the Printer Properties
dialog box.
User's guide
81