HP LaserJet Pro CP1025nw Color Printer - Manual (Page 119)

Table 9-2 Control-panel light patterns (continued)
Light status State of the product Action
Cartridge and attention lights blink. The print cartridge is very low and has
reached the end of its estimated useful
life. When the supply has reached this
condition, the HP Premium Protection
warranty for that supply has ended. You do not need to replace the print
cartridge at this time unless print quality
is no longer acceptable. Press the
Resume button to continue.
A non-HP print cartridge in use. You do not need to replace the print
cartridge at this time unless print quality
is no longer acceptable. Press the
Resume button to continue.
Print cartridge is rotating. No action is required. Wait for the
rotation period to end. The product
should enter the previous state when the
rotation period is finished.
Cartridge and ready lights are on. The print cartridge has reached the end
of its estimated useful life. When the
supply has reached this condition, the HP
Premium Protection warranty for that
supply has ended. You do not need to replace the print
cartridge at this time unless print quality
is no longer acceptable.
Non-HP print cartridge in use and is very
low. No action is required.
Table 9-3 Wireless light patterns
Light status State of the product Action
Wireless light is off. The wireless connection is turned off. Press and hold the Wireless button for
2 seconds to turn on the WPS.
The Ethernet is connected. No action is required.
Wireless light blinks. The product is trying to establish a
wireless connection. No action is required.
There is a WPS error. Attempt to connect again.
Wireless light is on. The product has established a wireless
connection. No action is required.
ENWW Interpret control panel light patterns 107