HP LaserJet Pro CP1025nw Color Printer - Manual (Page 38)

NOTE: The installation CD is not required during an HP Smart Install. Do not insert the software
installation CD into the computer CD drive.
1. Turn the product on.
2. Connect the USB cable that came with the product to a computer and the product.
NOTE: If the installation program does not start automatically, the AutoPlay feature might be
disabled on the computer. Browse My Computer and double-click the HP Smart Install CD drive.
Double-click the SISetup.exe file to run the program to install the product. If you cannot find the HP
Smart Install CD drive, disconnect the USB cable and use the software CD to run the installation
program.
3. Follow the onscreen instructions. Remove the USB cable only if instructed. The HP Smart Install
program might take a few minutes to start.
NOTE: If the program prompts you to select a connection type, select the Configure to print
using USB option.
26 Chapter 4 Connect the product ENWW