HP LaserJet Pro CP1025nw Color Printer - Manual (Page 120)

Status alert messages
Status alert messages appear on the computer screen when the product has certain problems. Use the
information in the following table to solve these problems.
Alert message Description Recommended action
Black Cartridge Low The print cartridge is nearing the estimated
end of its useful life. The product indicates when a print cartridge
level is low. Actual cartridge life remaining
may vary. Consider having a replacement
available to install when print quality is no
longer acceptable. The print cartridge does
not need to be replaced now.
This alert displays only if the product is
customer configured to stop when the print
cartridge reaches the “very low” threshold.
Black Cartridge Very Low The print cartridge is at the estimated end of
its useful life.
Print quality may decrease. Choose a
reminder option or replace print cartridge
when quality becomes unacceptable.
To ensure optimal print quality, HP
recommends replacing the print cartridge at
this point. You do not need to replace the
print cartridge at this time unless print quality
is no longer acceptable. Actual print
cartridge life may vary.
Once an HP print cartridge has reached
“very low”, HP's Premium Protection
Warranty on that print cartridge has ended.
All print defects or cartridge failures incurred
when an HP supply is used in continue at
very low mode will not be considered to be
defects in materials or workmanship in the
supply under the HP Print Cartridge
Warranty Statement.
Calibrating The product is performing the internal
calibration process to ensure the best
possible print quality. Wait for the process to complete.
Cartridge Memory Error on <Color> The e-label for one of the print cartridges
cannot be read or is missing. ● Reinstall the print cartridge.
● Turn off the product and disconnect the
power cable from the product. Wait
30 seconds and then reconnect the
power cord and turn on the product.
● If the problem is not solved, replace the
cartridge.
Cool Down Mode After prolonged, continuous operation, or
after printing on narrow paper, the product
must pause to cool. Printing will continue when the product has
cooled.
108 Chapter 9 Solve problems ENWW