HP LaserJet Pro CP1025nw Color Printer - Manual (Page 40)

Configure the IP address
1. Connect the network cable to the product and to the network.
2. Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
3. Press and hold the Resume button for two to three seconds to print a configuration page and a
supplies status page.
4. Find the IP address on the configuration report.
LASERJET PROFESSIONAL
Install the product on a wired network with HP Smart Install
HP Smart Install on a wired network
NOTE: This installation type is supported for Windows only.
1. Print a configuration page and locate the product IP address.
2. Open a Web browser using the computer where you want to install the product.
3. Type the IP address for the product in the address line of the browser.
4. Click the HP Smart Install tab.
28 Chapter 4 Connect the product ENWW