HP Hitachi Dynamic Link Manager Software - Manual (Page 221)

#/dev/sddlmaa4 /tmp ext2 defaults 1 2
/dev/sda4 /tmp ext2 defaults 1 2
:
:
5
.
Copy the configuration contained in the boot loader configuration file,
which was used for startup from the HDLM device.
The following shows an example configuration. Note that option in the
example represents an option that can be specified to suit the user
environment.
¢
When GRUB is used as the boot loader with Xen kernels:
For details on Xen kernels, see
Table 3-61 Xen Hypervisor Operating
Environments Supported by HDLM on page 3-88 .
:
:
title XEN
root (hd0,1)
kernel /boot/xen.gz
module /boot/vmlinuz-2.6.16.60-0.21-xen vga=0x31a
splash=silent showopts
module /boot/initrd-2.6.16.60-0.21-xen.hdlm
¢
When GRUB is used as the boot loader with non-Xen kernels:
For details on kernels supported by HDLM, see
Hosts and OSs
Supported by HDLM on page 3-3 .
:
:
title Red Hat Enterprise Linux (2.6.18-194.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-194.el5 ro option
ramdisk_size=18958 option
initrd /initrd-hdlm-2.6.18-194.el5.gz
¢
When LILO or ELILO is used as the boot loader:
:
:
image=/boot/vmlinuz-2.6.18-194.el5
label=HDLM_194.EL
initrd=/boot/initrd-hdlm-2.6.18-194.el5.gz
read-only
append="option ramdisk_size=18958 option"
6
.
Change the name of the configuration contained in the boot loader
configuration file.
Change the name of the configuration that you copied in step 5. You can
assign any name that indicates that the configuration is used for
specifying the SCSI device.
¢
When GRUB is used as the boot loader:
Change the underlined text as follows:
Creating an HDLM Environment
3-149
Hitachi Dynamic Link Manager User Guide for Linux ®