HP Hitachi Dynamic Link Manager Software - Manual (Page 628)

Message ID Message Text Explanation
device, or specify settings so that HDLM
manages the device that is listed next to
the root partition specified in the /etc/
fstab file.
KAPL12322-I Execution of linuxrc
started.
Details
Execution of linuxrc started.
Action
None.
KAPL12323-I The insertion of the
module was started.
Module name = aa...aa
Details
The insertion of the module was started.
aa...aa: The name of the module being
inserted
Action
None.
KAPL12324-E The module could not be
inserted. Module name =
aa...aa
Details
The module could not be inserted.
aa...aa: The name of the module whose
insertion has failed
Action
Confirm that the system environments
are not changed after creating the initial
ramdisk image file.
Check whether there is a mistake in the
initial ramdisk image file specified in the
config file of the boot loader.
KAPL12325-I The command started.
Command name =
aa...aa
Details
aa...aa: The started command
Action
None.
KAPL12326-E The command could not
execute. Command name
= aa...aa
Details
aa...aa: The failed command
Action
For dracut command:
Perform the following confirmation
corresponding to the output
command, and then retry. Re-
execute the dracut command after
performing the next check according
to the outputted command.
And if the error message is
outputted before this message,
remove the cause of the error with
reference to the contents of the
message.
cp:
8-116
Messages
Hitachi Dynamic Link Manager User Guide for Linux ®