HP Hitachi Dynamic Link Manager Software User Manual
Page 599
Message ID
Message Text
Explanation
KAPL10321-W The specified HDLM device is
invalid. Device = aa...aa.
Specify a valid logical device file
name of an HDLM device, and
then execute the dlmcfgmgr
utility.
Details
Executing the HDLM-configuration
definition utility (dlmcfgmgr)
failed because the logical device
file name of the HDLM device was
incorrect.
aa...aa: Logical device file name
of HDLM device
Action
Specify a correct logical device file
name of an HDLM device, and
then re-execute the dlmcfgmgr
utility. For details on the
dlmcfgmgr utility, see
.
KAPL10322-E
A file that defines HDLM-
unmanaged disks could not be
created. File name = aa...aa,
Errno = bb...bb. Execute the
DLMgetras utility to collect error
information, and then contact
your vendor or maintenance
company.
Details
Execution of the HDLM-
configuration definition utility
(dlmcfgmgr) failed because an
exclusion disk definition file
(aa...aa) could not be created.
aa...aa: File name
bb...bb: Error number (decimal
number)
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM.
For details on the DLMgetras
utility, see
Collecting HDLM Error Information
KAPL10323-E
The registration of the block
device driver for HDLM failed. All
dynamic major numbers are
exhausted. Unload (remove
from the kernel) an unnecessary
driver, and then execute the
dlmcfgmgr utility again.
Details
Registration of the block device
driver of HDLM failed because all
dynamic major numbers were
used.
Action
Unload (remove from the kernel)
any unnecessary driver, and then
re-execute the HDLM-
configuration definition utility
(dlmcfgmgr). For details on the
dlmcfgmgr utility, see
.
Messages
8-87
Hitachi Dynamic Link Manager User Guide for Linux
®