HP Hitachi Dynamic Link Manager Software - Manual (Page 90)

Storage systems that are used must have a dual controller configuration. If
you use them in a HUB-connected environment, specify a unique loop ID for
all the connected hosts and storage systems. For details on the microprogram
version required for using HDLM, see HDLM Release Notes. For details on the
settings information for storage system, see the maintenance documentation
for the storage system.
Note:
For details on storage systems applicable to a Hitachi Compute Blade
environment or boot disk environment, see the following according to
your OS and version:
¢
Boot Disk Environments and Hitachi Compute Blade Environments
Supported by HDLM on page 3-38 in Related Products When Using
Red Hat Enterprise Linux AS4/ES4 on page 3-19
¢
Boot Disk Environments and Hitachi Compute Blade Environments
Supported by HDLM (If an FC-SAN Is Used) on page 3-57 in Related
Products When Using Red Hat Enterprise Linux 5 on page 3-42
¢
Boot Disk Environments Supported by HDLM on page 3-64 in Related
Products When Using Red Hat Enterprise Linux 6 on page 3-60
¢
Boot Disk Environments and Hitachi Compute Blade Environments
Supported by HDLM on page 3-69 in Related Products When Using
SUSE LINUX Enterprise Server 10 on page 3-65
¢
Boot Disk Environments Supported by HDLM (If an FC-SAN Is Used)
on page 3-73 in Related Products When Using SUSE LINUX
Enterprise Server 11 on page 3-71
¢
Boot Disk Environments Supported by HDLM on page 3-75 in Related
Products When Using Oracle Enterprise Linux 4 on page 3-74
¢
Boot Disk Environments Supported by HDLM on page 3-78 in Related
Products When Using Oracle Enterprise Linux 5 on page 3-76
¢
Boot Disk Environments Supported by HDLM on page 3-81 in Related
Products When Using Oracle Unbreakable Enterprise Kernel 5 on page
3-79
¢
Related Products When Using Oracle Unbreakable Enterprise Kernel 6
on page 3-81 in Boot Disk Environments Supported by HDLM on
page 3-83
HBA (If an FC-SAN Is Used)
For details about the supported HBAs, see HDLM Release Notes.
NIC (If an IP-SAN Is Used)
For details about the supported NICs, see HDLM Release Notes.
When Handling Intermediate Volumes Managed by Hitachi RapidXchange
The following table lists the related programs that are required when you
convert data with intermediate volumes managed by Hitachi RapidXchange.
3-18
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Linux ®