HP Photosmart 8050xi Printer - Manual (Page 10)

selected size. Each page contains one photo. However, if you specify several
copies of the same photo, they all appear on the same page (if enough space is
available). Allow photos to dry for one week before laminating.
Edit
●
Remove red-eye : Select to remove red-eye from the photo displayed on the
printer screen. The printer automatically removes red-eye by default. Use the
Preferences menu to disable automatic red-eye removal.
● Photo brightness : Press or to increase or decrease the photo brightness.
● Add frame : Use the Select Photos arrows to select a pattern and a color for a
frame.
● Add color effect : Use the Select Photos arrows to select a color effect. The
color effect does not affect frames created with the Add frame option. These
color effects are only for printing and do not change your original digital photo.
Tools
●
View 9-up : View nine images at once from the inserted memory card.
● Slide show : Press OK to pause and unpause the slide show; press Cancel to
stop the slide show.
● Print quality : Choose either Best (default) or Normal print quality.
● Print sample page : Select to print a sample page useful for checking the print
quality of the printer.
● Print test page : Select to print a test page containing information about the
printer that can help in troubleshooting problems.
● Clean cartridges : Select to clean the print cartridges. After the cleaning finishes,
the printer prints a test page. You have the option to clean the cartridges again if
the test page shows that they are still not clean.
● Align cartridges : Select to align the print cartridges.
Bluetooth
●
Device address : Some devices with Bluetooth wireless technology require you to
enter the address of the device they are trying to locate. This menu option shows
the device address.
● Device name : You can select a device name for the printer that appears on other
devices with Bluetooth wireless technology when they locate the printer.
● Passkey : Press to increase number by one; press to decrease the number.
Press OK to move to next number.
If the printer Bluetooth Security level is set to High , you can assign a numerical
passkey that Bluetooth device users trying to locate the printer must enter before
printing. The default passkey is 0000.
● Visibility : You can set the Bluetooth-equipped printer to be visible or invisible to
other devices with Bluetooth wireless technology by changing this accessibility
option. When
Visibility is set to Not visible , only devices that know the device
address can print to it.
● Security level : Select Low or High . The Low setting does not require users of
other devices with Bluetooth wireless technology to enter the printer passkey.
HP Photosmart 8000 series User's Guide 7