HP Photosmart 8050xi Printer User Manual

Page 45

Advertising
background image

panel. To print the photos you want, select them manually. For more information,
see

Selecting photos to print

.

I selected the

Print new

option in the printer menu, but the printer did not print

the new photos stored on the memory card.

Solution

There are no new photos on the memory card, or the photos have

already been printed from the printer control panel. To print the photos you want,
select them manually. For more information, see

Selecting photos to print

.

Photo paper does not feed into the printer correctly from the Photo cassette.

Solution

If you are using the Photo cassette for printing, there may be paper loaded in
the Main tray. Remove any paper from the Main tray before inserting the
Photo cassette for printing.

The Photo cassette paper guides may not be adjusted correctly. Make sure
that the Photo cassette paper-width guide and the paper-length guide fit
close to the edges of the paper without bending the paper.

The Photo cassette may not be engaged. Insert the Photo cassette until it
snaps into place. For more information about loading the Photo cassette, see

Loading your paper

.

The printer may be in an extremely high- or low- humidity environment. Load
one sheet of photo paper at a time.

The paper you are trying to load might be too large for the Photo cassette.
For a list of sizes that you can use with the Photo cassette, see

Loading your

paper

.

The photo paper may be curled. If the photo paper is curled, place the paper
in a plastic bag and gently bend it the opposite direction of the curl until the
paper lies flat. If the problem persists, then use photo paper that is not curled.

Paper does not feed into the printer correctly from the Main tray.

Solution

There may be too much paper loaded in the Main tray. Remove some paper
from the tray and try printing again.

The paper guides may not be adjusted correctly. Make sure that the paper-
width guide and the paper-length guide fit close to the edges of the paper
without bending the paper.

Two or more pieces of paper may be sticking together. Remove the paper
from the Main tray, fan the edges of the stack to separate the sheets of
paper, then reload the paper and try printing again.

If the paper is wrinkled or bent, try using different paper.

Chapter 6

42

HP Photosmart 8000 series

Advertising