HP StoreEver TapeAssure Software - Manual (Page 180)

1. Navigate to the L&TT installation directory on the remote computer.
Figure 82 HP L&TT installation directory on a remote computer
2. Execute HP_LTT.exe
(Linux) To run L&TT from a remote directory:
1. Verify that the Linux version on the remote computer is compatible with the installed binary.
2. Start the NFS service on both computers.
3. On the machine where L&TT is installed edit the /etc/exports file:
Add the line /opt/ltt *(rw,sync,no_root_squash)
4. Restart the NFS service.
5. On the remote computer, mount the /opt/ltt shared directory from the source computer to
a temporary directory with the following command:
mount <ip-address>:/opt/ltt <temp>
6. Change directory to the temp directory and execute the hp_ltt binary.
Files installed on the system
During installation, L&TT files are installed in the following directories:
Table 1 L&TT installation directory locations
Directory Location Operating System
/opt/ltt (main executable is hp_ltt) HP-UX, Linux, and
Tru64
SYS:System\hpltt (main executable is
hp_ltt.nlm )
Netware
C:\Program Files\Hewlett—Packard\
Library znc Tape Tools (main executable
is hp_ltt.exe)
Windows
Several sub-directories are created under the main installation directory. These sub-directories are
as follows:
•
Catalogs— This is the location where the message strings for the software are kept. The
end-user version has only the catalogs for the latest version of code. With the support personnel
installation, catalogs are included for previous versions (back to version 2.5), so support tickets
generated by these versions can be viewed.
•
Firmware— This is the default directory where firmware files are kept. When L&TT is first
installed, this directory is usually empty (unless specific firmware images were bundled - such
as the 2.7 SR2 release that includes firmware for DDS3 write recalibration). The name and
location of the firmware directory can be changed from Options > Preferences.
•
Logs— This is the default directory where L&TT saves event logs and support tickets. This
directory is also used to store any script-generated files such as baseline files, results files, and
so on.
180 Advanced installation topics