The printout is blank – HP Photosmart Premium Fax C309 User Manual

Page 147

Advertising
background image

NOTE:

You cannot use the document feeder tray with the Fit to Page feature. To use the Fit to Page

feature, the original must be placed print side down on the right front corner of the glass.

Cause: The original was placed incorrectly on the glass or in the document feeder tray.

If this did not solve the issue, try the next solution.

Solution 3: Wipe the glass and the back of the document lid

Solution: Turn off the product, unplug the power cord, and then use a soft cloth to wipe the glass and the back
of the document lid.

Cause: Debris might have been stuck on the glass or on the back of the document lid. The product interprets
anything it detects on the glass as part of the image.

The printout is blank

Solution: Load the original on the glass or in the document feeder tray.

If you are loading your original on the glass, place it print side down on the right front corner as shown below.
To copy a photo, position the photo so that the long edge of the photo is along the front edge of the glass.

Copy troubleshooting

145

Solve a problem

Advertising