Aborting an ipdu update, Ipdu inventory, Deploying an ipdu – HP Smart Update Manager User Manual
Page 58
To edit a node
1.
From the Nodes screen, highlight the node and then click Actions
→Edit.
2.
Change the items you want to edit:
•
Description
•
Type
NOTE:
Select the check box if you want HP SUM to automatically add Associated
Devices. (Not available for all node types.)
•
HP SUM displays the currently selected baseline and additional package. Use the
drop-down menu if you want to change these.
NOTE:
If you want to delete a baseline or additional package, the baseline or additional
package cannot be associated with a node. Associate a new baseline or delete the node
to delete a baseline.
•
Credentials
•
OS Management Options – None, Use SNMP, Agentless Management Service, Use
WBEM
•
Reboot Options – Reboot system, Reboot delay, Reboot message
•
Installation Options – Downgrade or rewrite versions
•
Force Options – Show firmware or software updates
3.
Click OK to accept the changes and return to the Nodes screen.
Aborting an iPDU update
1.
From the iPDU screen, highlight the iPDU whose updates you want to cancel.
2.
Click Actions
→Abort.
iPDU inventory
1.
From the iPDU screen, highlight the iPDU on which you want to take inventory.
2.
Click Actions
→Inventory.
3.
The iPDU Inventory procedure is the same as the Node Inventory procedure.
To inventory a node
1.
From the Nodes screen, highlight the node and then click Actions
→Inventory.
2.
Select a baseline, additional package, or both to apply to the node.
3.
Click Inventory.
Deploying an iPDU
1.
From the iPDU screen, highlight the iPDU you want to deploy.
2.
Click Actions
→Review/Deploy.
3.
The iPDU Deploy procedure is the same as the Node Deploy procedure.
58
Using the HP SUM GUI