HP Smart Update Manager - Manual (Page 80)

Text Windows Linux Value Return code
A bad input parameter was
encountered. -2 254 -2 FAILURE_BAD_PARM
The installation of the component
failed. -3 253 -3 FAILURE_COMPONENT_FAILED
Windows smart-component return codes
Meaning Return code
The smart component was not installed. For more
information, see the log file. 0
The smart component was installed successfully. 1
The smart component was installed successfully, but the
system must be restarted. 2
The installation was not attempted because the required
hardware is not present, the software is current, or there
is nothing to install. 3
Linux smart-component return codes
Single-node servers:
Meaning Return code
The smart component was installed successfully. 0
The smart component was installed successfully, but the
system must be restarted. 1
The installation was not attempted because the required
hardware is not present, the software is current, or there
is nothing to install. 2
The smart component was not installed. For more
information, see the log file. 3
Multi-node servers:
Meaning Return code
The installation of the deliverable was successful. No reboot
is required. 0
The installation of the deliverable was successful. Reboot
is required for the deliverable to be enabled. 1
The installation was not attempted because the version to
be installed matches the version already installed. 2
The installation was not attempted because of one of the
following: 3
•
The version to be installed is older than the version
already installed.
• The supported hardware is not present, not enabled,
or in a state that an installation could not be attempted.
•
The smart component does not support the environment.
• There is nothing for the component to accomplish.
80 Using legacy scripts to deploy updates