Recommended papers, Load other types of paper in the paper tray, Set the paper type – HP PSC 1315 All-in-One Printer User Manual
Page 23
user guide
load originals and load paper
15
load or
iginals & paper
recommended papers
For the best print quality, use HP papers. Paper that is too thin, paper that has a
slick texture, or paper that stretches easily can cause paper jams. Paper that has
a heavy texture or does not accept ink can cause printed images to smear, bleed,
or not be filled in completely. For more information about HP papers, check our
website at:
load other types of paper in the paper tray
The following table provides guidelines for loading nonstandard types of paper.
For best results, adjust the paper settings each time you change the paper type
or paper size. For more information, see
Note:
Some paper types might not be available in your country/region.
Note:
Photo paper might curl when you remove it from the box. If this
occurs, curl the paper the opposite way to flatten it before inserting it into
the HP psc.
set the paper type
If you want to use a different type of paper, load that paper in the paper tray.
You should then change the paper type settings to ensure the best print quality.
This setting refers to copy settings only. If you want to set the paper type for
printing, set the properties from the Print dialog box in the software program on
your computer.
The following procedure describes how to change the paper type setting on your
HP psc.
1
Load paper into the HP psc.
2
Press
Paper Type
on the front panel to change the setting to
Plain
or
Photo
.
paper
tips
HP papers
•
HP Premium Paper: locate the gray arrow on the nonprinting side of
the paper, and then load paper with the arrow side facing up.
•
HP Greeting Card Paper, HP Glossy Greeting Card Paper, or
HP Textured Greeting Cards: insert a small stack of greeting cards
with the print side down, into the paper tray until it stops.
Labels
(works only with
printing)
•
Always use letter or A4 label sheets designed for use with HP inkjet
products (like Avery Inkjet Labels), and make sure that the labels are
not over two years old.
•
Fan the stack of labels to make sure none of the pages are sticking
together.
•
Place a stack of label sheets on top of standard paper in the paper
tray, print side down. Do
not insert labels one sheet at a time.