HP PSC 1315 All-in-One Printer - Manual (Page 29)

user guide
use the copy features
21
cop
y
2 Load 4 by 6 inch (10 by 15 cm) tabbed photo paper print side down in
the paper tray, with the tab facing out towards you.
3 If your original is not 4 by 6 inches (10 by 15 cm), press the Size button to
select Fit to Page .
The HP psc will resize the original to 4 by 6 inches (10 by 15 cm) to create
a borderless copy.
4 Press the Paper Type button to select Photo .
This tells the HP psc that you have photo paper loaded in the paper tray.
When printing onto photo paper, the HP psc automatically copies your
original in Best quality mode.
5 Press Start Copy , Black or Start Copy , Color .
reduce or enlarge an original to fit the paper loaded
Use Fit to Page when you want to automatically enlarge or reduce your original
to fill the printable area of the paper size loaded in the paper tray.
For example, you can use Fit to Page to enlarge a small photo to fit within the
margins of a full-size page (as shown below), reduce an original to prevent
unwanted cropping of text or images around the margins, or reduce or enlarge
an original to create a borderless 4 by 6 inch (10 by 15 cm) photo.
1 Make sure that the glass and lid backing are clean.
2 Load your original face down on the left front corner of the glass.
If you are copying a photo, position the photo on the glass so the long
edge of the photo is along the front edge of the glass, as shown below.