HP PSC 1315 All-in-One Printer - Manual (Page 43)

user guide
maintain your hp psc
35
maintain y
our hp
psc
clean the print cartridge contacts
Clean the print cartridge contacts only if the Self-Test Report shows streaks.
Caution! Do not remove both print cartridges at the same time.
Remove and clean each print cartridge one at a time.
Make sure you have the following materials available:
• Dry foam rubber swabs, lint-free cloth, or any soft material that will not
come apart or leave fibers.
• Distilled, filtered, or bottled water (tap water might contain contaminants
that can damage the print cartridges).
Caution! Do
not use platen cleaners or alcohol to clean the print
cartridge contacts. These can damage the print cartridge or the
HP psc.
1 Turn the HP psc on and open the print-carriage access door.
The print carriage moves to the center.
2 After the print carriage has moved to the center, unplug the power cord
from the back of the HP psc.
3 Push down on the print cartridge to release it, and then pull it out of its slot.
4 Inspect the print cartridge contacts for ink and debris buildup.
5 Dip a clean foam rubber swab or lint-free cloth into distilled water, and
squeeze any excess water from it.
6 Hold the print cartridge by its sides.
7 Clean only the contacts. Do
not clean the nozzles.
8 Place the print cartridge back into the holder.
9 Repeat if necessary for the other print cartridge.
10 Close the door and plug in the HP psc.
Because you removed a print cartridge from its holder, the HP psc
automatically prints a print cartridge alignment sheet.
Contacts
Nozzles - do not clean