HP Photosmart C5580 All-in-One Printer - Manual (Page 182)

Solution 4: Load the next disc on the CD/DVD holder
Solution: Remove the CD/DVD holder from the CD/DVD tray. Remove the printed
CD/DVD from the holder. Load the next disc onto the CD/DVD holder with the
printable side up and reinsert the holder into the CD/DVD tray until the lines on the
holder line up to the white lines on the tray. When the product detects the holder, the
prompt disappears.
Cause: The product prompted you to insert the next disc when printing multiple CD/
DVDs in a print job.
The product does not detect a CD/DVD on the holder
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
• Solution 1: Load a CD/DVD on the CD/DVD holder
• Solution 2: Load a CD/DVD with the printable side up
Solution 1: Load a CD/DVD on the CD/DVD holder
Solution: Remove the CD/DVD holder from the CD/DVD tray. Load a printable disc
onto the CD/DVD holder with the printable side up and reinsert the holder into the
CD/DVD tray until the lines on the holder line up to the white lines on the tray.
Cause: You inserted the CD/DVD holder into the CD/DVD tray without loading a
CD/DVD onto the holder.
If this did not solve the issue, try the next solution.
Solution 2: Load a CD/DVD with the printable side up
Solution: Remove the CD/DVD holder from the CD/DVD tray. Load a printable disc
onto the CD/DVD holder with the printable side up and reinsert the holder into the
CD/DVD tray until the lines on the holder line up to the white lines on the tray.
Cause: You loaded the CD/DVD upside down on the holder.
The product stalled while printing a CD/DVD
Solution: Ensure that there is at least 7.5 cm (3 inches) of space behind the
product. Also, make sure that the slot on the back of the product is not blocked.
Cause: The product pulled the CD/DVD holder while printing on the CD/DVD. The
holder can protrude about 7.5 cm (3 inches) from the back of the product. If there is
not sufficient space behind the product, the holder stops and printing stalls.
CD/DVD print troubleshooting 179
Trou
bles
ho
ot
ing