HP LaserJet M1319f Multifunction Printer - Manual (Page 48)

Size Dimensions Priority input tray Tray 1
Envelope C5 162 x 229 mm (6.93 x 9.84 inches)
Envelope B5 176 x 250 mm (6.7 x 9.8 inches)
Envelope Monarch 98 x 191 mm (3.9 x 7.5 inches)
Postcard 100 x 148 mm (3.94 x 5.83 inches)
Double postcard 148 x 200 mm (5.83 x 7.87 inches)
Special paper or print media guidelines
This product supports printing on special media. Use the following guidelines to obtain satisfactory
results. When using special paper or print media, be sure to set the type and size in your print driver to
obtain the best print results.
CAUTION: HP LaserJet printers use fusers to bond dry toner particles to the paper in very precise
dots. HP laser paper is designed to withstand this extreme heat. Using inkjet paper not designed for this
technology could damage your printer.
Media type Do Do not
Envelopes ● Store envelopes flat.
● Use envelopes where the seam
extends all the way to the corner of
the envelope.
● Use peel-off adhesive strips that
are approved for use in laser
printers.
● Do not use envelopes that are
wrinkled, nicked, stuck together, or
otherwise damaged.
● Do not use envelopes that have
clasps, snaps, windows, or coated
linings.
● Do not use self-stick adhesives or
other synthetic materials.
Labels ● Use only labels that have no
exposed backing between them.
● Use Labels that lie flat.
● Use only full sheets of labels.
● Do not use labels that have wrinkles
or bubbles, or are damaged.
● Do not print partial sheets of labels.
Transparencies ● Use only transparencies that are
approved for use in laser printers.
● Place transparencies on a flat
surface after removing them from
the product.
● Do not use transparent print media
not approved for laser printers.
Letterhead or preprinted forms ● Use only letterhead or forms
approved for use in laser printers. ● Do not use raised or metallic
letterhead.
Table 6-2 Supported envelopes and postcards (continued)
38 Chapter 6 Paper and print media ENWW