HP LaserJet M1319f Multifunction Printer - Manual (Page 51)

Configure trays
To set the default paper size or type from the control panel, complete the following steps.
Configure trays for copy jobs
1. On the product control panel, press Setup .
2. Use the arrow buttons to select System setup, and then press OK .
3. Use the arrow keys to select Paper setup, and then press OK .
4. Use the arrow keys to select either Def. paper size or Def. paper type, and then press OK .
5. Use the arrow keys to select a default type or size for the tray, and then press OK .
NOTE: To configure the product trays for print jobs, use the printer driver.
ENWW Configure trays 41