Adjust the lighter/darker (contrast) setting – HP LaserJet M1319f Multifunction Printer User Manual
Page 71
When making a copy of a photo or graphic, you can select the Film photo setting for photos or the
Picture setting for other graphics to increase the quality of your copy. Select the Mixed setting for
documents that include both text and graphics.
Adjust the copy quality for the current job
1.
On the product control panel, press
More Copy Settings
twice to see the current quality setting for
the copy.
2.
Use the arrow buttons to scroll through the quality setting options.
3.
Select a setting, and then press
Start Copy
to save the selection and immediately start the copy
job, or press
OK
to save the selection without starting the job.
NOTE:
The change in the setting remains active for about 2 minutes after the copy job has been
completed. During this time, Custom settings appears on the product control-panel display.
Adjust the default copy quality
1.
On the product control panel, press
Setup
.
2.
Use the arrow buttons to select Copy setup, and then press
OK
.
3.
Use the arrow buttons to select Default quality, and then press
OK
.
4.
Use the arrow buttons to select the copy quality, and then press
OK
to save the selection.
Adjust the lighter/darker (contrast) setting
The lighter/darker setting affects the lightness or darkness (contrast) of the copy. Use the following
procedure to change the contrast for the current copy job only.
Adjust the lighter/darker setting for the current job
1.
On the product control panel, press
Lighter/Darker
to see the current contrast setting.
2.
Use the arrow buttons to adjust the setting. Move the slider to the left to make the copy lighter than
the original, or move the slider to the right to make the copy darker than the original.
3.
Press
Start Copy
to save the selection and immediately start the copy job, or press
OK
to save the
selection without starting the job.
NOTE:
The change in the setting remains active for about 2 minutes after the copy job has been
completed. During this time, Custom settings appears on the product control-panel display.
Adjust the default lighter/darker setting
NOTE:
The default lighter/darker setting affects all copy jobs.
1.
On the product control panel, press
Setup
.
2.
Use the arrow buttons button to select Copy setup, and then press
OK
.
3.
Use the arrow buttons button to select Def. Light/dark, and then press
OK
.
ENWW
Copy settings
61