HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 131)

ENWW Using the job-storage features 115
1
5
3 Scroll to and touch U SER N AME .
4 Scroll to and touch your job.
5 Scroll to D ELETE , and then touch O K .
If D ELETE has next to it, the job requires a PIN to delete. See “Private jobs” on page 112.
QuickCopy jobs
The QuickCopy feature prints the requested number of copies of a job and stores a copy on the hard-disk. Additional copies
of the job can be printed later. This feature can be turned off from the printer driver.
The default number of different QuickCopy jobs that can be stored on the MFP is 32. At the control panel, you can set a
different default number. See
“System setup submenu” on page 150.
Caution If the MFP needs additional space to store newer QuickCopy jobs, the MFP will delete other stored QuickCopy
jobs, starting with the oldest job. To permanently store the job and prevent the MFP from deleting it when
space is needed, select the Stored Job option instead of the QuickCopy option.
Note The MFP must have a hard disk installed in order to use this feature.