HP Officejet Pro 276dw Multifunction Printer series - Manual (Page 26)

The document feeder tray holds a maximum of 50 sheets of plain A4-, Letter-, or legal-
size paper.
To load an original in the document feeder tray
Use these steps to load a document in the automatic document feeder.
1.
Load your original print-side up into the document feeder tray.
a.
If you are loading an original printed in portrait orientation, place the pages
so that the top edge of the document goes in first. If you are loading an
original printed in landscape orientation, place the pages so that the left
edge of the document goes in first.
b. Slide the media into the automatic document feeder until you hear a tone or
see a message on the display indicating that the loaded pages were
detected.
TIP: For more help on loading originals in the automatic document feeder,
refer to the diagram engraved in the document feeder tray.
2. Slide the width guides inward until they stop at the left and right edges of the
media.
NOTE: Remove all originals from the document feeder tray before lifting the lid on
the printer.
Load paper
This section provides instructions for loading media into the printer, and contains the
following topics:
•
Load standard-size paper
• Load envelopes
• Load cards and photo paper
• Load custom-size paper
Chapter 1
22 Get started