HP Officejet Pro 276dw Multifunction Printer series - Manual (Page 33)

To load Tray 2
1.
Pull the tray out of the printer by grasping under the front of the tray.
2. Insert the paper print-side down in the center of the tray. Make sure the stack of
paper aligns with the line on the width guide, and does not exceed the line
marking on the guide.
NOTE: Tray 2 can be loaded only with plain paper.
3. Slide the paper guides in the tray to adjust them for the size that you have
loaded.
4. Gently reinsert the tray.
5. Pull out the extension on the output tray.
Install the accessories 29