Set up hp eprint using the printer’s control panel, Set up hp eprint using the embedded web server – HP Officejet Pro 8100 ePrinter - N811a N811d User Manual
Page 40
3.
Click the Web Services tab.
4.
In the Web Services Settings section, click Setup, click Continue, and follow
the onscreen instructions to accept the terms of use.
5.
If prompted, choose to allow the printer to check for and install printer updates.
NOTE: If a printer update is available, the printer will download and install
the update, and then restart. You will have to repeat the instructions from step
1 to set up HP ePrint.
NOTE: If prompted for proxy settings and if your network uses proxy
settings, follow the instructions on the screen to set up a proxy server. If you
do not have the details, contact your network administrator or the person who
set up the network.
6.
When the printer is connected to the server, the printer prints an information
page. Follow the instructions on the information page to finish the setup.
Mac OS X
▲
To set up and manage Web Services in Mac OS X, you can use the printer’s
embedded web server (EWS). For more information, see Set up HP ePrint using
the embedded web server.
Set up HP ePrint using the printer’s control panel
1.
On the printer control panel, press the
(HP ePrint) button. The printer prints an
information page.
2.
Follow the instructions on the information page.
Set up HP ePrint using the embedded web server
You can use the printer’s embedded web server (EWS) to set up and manage HP
ePrint.
To set up HP ePrint, complete the following steps:
1.
Open the EWS. For more information, see Embedded web server.
2.
Click the Web Services tab.
3.
In the Web Services Settings section, click Setup, click Continue, and follow
the onscreen instructions to accept the terms of use.
4.
If prompted, choose to allow the printer to check for and install printer updates.
NOTE: If a printer update is available, the printer will download and install
the update, and then restart. You will have to repeat the instructions from step
1 to set up HP ePrint.
NOTE: If prompted for proxy settings and if your network uses proxy
settings, follow the instructions on the screen to set up a proxy server. If you
do not have the details, contact your network administrator or the person who
set up the network.
5.
When the printer is connected to the server, the printer prints an information
page. Follow the instructions on the information page to finish the setup.
Chapter 3
36
HP ePrint