HP Designjet L25500 Printer series - Manual (Page 77)

Physical specifications
Table 8-5 Printer physical specifications
Weight (including stand) 161 kg (42-in printer)
181 kg (60-in printer)
Width 1985 mm (42-in printer)
2465 mm (60-in printer)
Depth 690 mm
Height 1370 mm
Memory specifications
Table 8-6 Memory specifications
Memory (DRAM) supplied 256 MB
Memory (DRAM) maximum 512 MB
Hard disk 50 GB
Power specifications
NOTE: An electrician is required for the setup and configuration of the building electrical system used
to power the printer and also for printer installation. Make sure that your electrician is appropriately
certified according to local regulations and supplied with all the information regarding the electrical
configuration.
Your printer requires that the following electrical components be supplied and installed by the customer,
according to the National Electrotechnical Code (NEC).
Table 8-7 Single phase line specifications
60-in printer 42-in printer 60–in printer (Japan only)
Number of power cords 2 2 2
Input voltage 220-240 V~ (-10%+6%) 200-240 V~ (-10%+6%) 200V (-10%+10%)
Input frequency 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
Power consumption 4.8 kW (overall consumption
for both power cords) 3.5 kW (overall consumption
for both power cords) 4.8 kW (overall consumption
for both power cords)
Maximum load current (per
power cord) 15 A 13 A 15 A
Ecological specifications
This product complies with European Union WEEE and RoHS Directives.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks To determine the ENERGY
STAR® qualification status of these product models. See:
http://www.hp.com/go/energystar .
For up-to-date ecological specifications of your printer, please go to http://www.hp.com/ and search for
“ecological specifications”.
ENWW Physical specifications 73
Prin
ter specificatio
ns