HP Secure Key Manager - Manual (Page 134)

Table 52 LDAP Failover Server Properties section components
Component Description
Failover Server IP or
Hostname
The IP address or hostname of the LDAP server to use as the failover.
Failover Server Port The port on which the LDAP server is listening.
Edit Click Edit to modify the properties.
Clear Click Clear to remove the current properties.
LDAP Test Click LDAP Test to test the LDAP connection after you have defined an LDAP server.
TIP:
The Testing the LDAP User Directory Connection and Testing the LDAP Failover Server Connection
commands are basically equivalent to the LDAP Test buttons in the Management Console; however, they
print connection information as well and thus can be more helpful in debugging connection problems.
LDAP User & Group Configuration
The LDAP User & Group Configuration page enables you to view the users and groups for the KMS
Server as defined by the LDAP directory. You can only view the users and groups on this page; users and
groups are created, modified, and removed on the LDAP server itself.
This page contains the following sections:
• LDAP Users
• LDAP Groups
• User List
LDAP Users
The LDAP Users section displays the users available in the LDAP user directory.
Figure 73 Viewing the LDAP Users section
The following table describes the components of the LDAP Users section.
134 Using the Management Console