HP Secure Key Manager - Manual (Page 274)

Syntax
hostname (config)# clientevent syslog
Enable Syslog [n]:
Syslog Server #1 IP [None]:
Syslog Server #1 Port [514]:
Syslog Server #2 IP [None]:
Syslog Server #2 Port [514]:
Syslog Facility:
1:
local0
2: local1
3: local2
4: local3
5: local4
6: local5
7: local6
8: local7
Enter a number (1 -8) [2]:
Client Event Log syslog settings successfully saved.
Syslog is enabled.
Warning:
The syslog protocol insecurely transfers logs in
cleartext
Related
command(s)
• no clientevent syslog
• show clientevent syslog
edit log rotation – edit the log rotation settings for the specified log.
Syntax
hostname (config)# edit log rotation <log name>
Please pick one of the following rotation schedules:
1) Daily 2) Weekly 3) Monthly
Rotation Schedule [1]:
Enter the num logs archived:
4
Please pick one of the following types of transfer:
1) None 2) FTP 3) SCP
Transfer Type [1]:
Enter the host:
Enter the directory:
Enter the username:
Enter the password:
After providing the necessary information, the system displays a message confirming
that the log rotation was changed.
Related
command(s)
• show log rotation
log signing – enable Secure Logs.
Syntax
hostname (config)# log signing <log-name>
Related
command(s)
• recreate logsigning cert
• show logsigning cert
• show log signing
no activity syslog – disable the use of the syslog protocol to send Activity Log messages to an
external machine.
Syntax
hostname (config)# no activity syslog
Activity Log syslog settings cleared.
Syslog is disabled.
274 Using the Command Line Interface