Installing a ca certificate, Removing a ca certificate, Fips status server procedures – HP Secure Key Manager User Manual
Page 56: Enabling the fips status server, Viewing the fips status report, Kms server procedures, Enabling ssl
8.
Copy the CA certificate request text.
The certificate text looks similar, but not identical, to the following text.
-----BEGIN CERTIFICATE REQUEST-----
MIIBmzCCAQQCAQAwWzEPMA0GA1UEAxMGZmxldGNoMQkwBwYDVQQKEwA
VBAsTADEJMAcGA1UEBxMAMQkwBwYDVQQIEwAxCzAJBgNVBAYTAlVTMQ
ZIhvcNAQkBFgAwgZ8wDQYJKoZIhvcAYBABTUxxgY0AMIGJAoGBAMUqA
sCcUqnt5Yug+qTSbgEFnvnYWUApHKDlx5keC1lguQDU1ol2Xcc3YGrU
JIMK2giQ5b+ABQDemRiD11vInQqkhV6ngWBRD0lpKCjU6QXDEE9KGCK
0rr2LErqxUuYwOu50Tfn4T3tKb1HGgfdzAgMBAAGgADANBgkqhkiG9w
OBgQCuYnv8vBzXEZpgLD71FfeDK2Zqh0FnfTHXAkHrj4JP3MCMF5nKH
NHHy0cYKTDP+hor68R76XhLVapKMqNuUHUYf7CTB5JNHHy0cYKTNHHy
Ce8nvvUG+yp2Eh8aJ7thaua41xDFXPmIEXTqzXi1++DCWAdWayXmg==
-----END CERTIFICATE REQUEST-----
CAUTION:
Be sure to include the first and last lines (-----BEGIN CERT... and -----END
CERT...), and copy only the text in the certificate. Do not copy any extra white space.
9.
Sign this request with another CA. Copy the signed certificate text.
10.
Navigate back to the Local Certificate Authority List section.
11.
Select the CA Certificate Request and click Properties to access the CA Certificate Information section.
12.
Click Install Certificate.
13.
Paste the text of the signed CA certificate into the Certificate Response field.
14.
Click Save.
When you return to the Local Certificate Authority List section, the CA certificate is now active.
Installing a CA certificate
Prior to installing a CA certificate, you must have a copy of the CA certificate on your local drive.
To install a CA certificate:
1.
Log in to the Management Console as an administrator with Certificate Authorities access control.
2.
Navigate to the Install CA Certificate section of the Certificate and CA Configuration page (Security
> Known CAs).
3.
Enter a value for the Certificate Name and paste the CA certificate text in the Certificate field.
4.
Click Install. The CA will be added to the CA Certificate list.
Removing a CA certificate
To remove a CA certificate:
1.
Log in to the Management Console as an administrator with Certificate Authorities access control.
2.
Navigate to the CA Certificate List section of the Certificate and CA Configuration page (Security
> Known CAs).
3.
Select a CA certificate and click Delete.
56
Performing configuration and operation tasks