Restart/halt, 21 viewing the restart/halt section, 7 services list section components – HP Secure Key Manager User Manual

Page 93: 8 restart/halt section components

Advertising
background image

Table 7 Services List section components

Components

Description

Name

KMS Server: the “brains” of the SKM, which manages all incoming and outgoing

connections (both secure and clear text). When disabled, the SKM cannot be

used to fulfill requests.

Web Administration: When enabled, the SKM can be configured through a web

browser.

SSH Administration: the remote Command Line Interface (CLI) administration tool.

When enabled, the SKM can be configured using the remote CLI using SSH.

SNMP Agent: When enabled, the SKM sends alerts over the network to monitor

system activity.

Status

Current activity status of the service type, either started or stopped. You control the

status by clicking Start or Stop.

Startup

The state of each of the services after the SKM boots up.

Start

Click Start to start a service. The status column of the Services List section displays

“Started” in the status column for the affected service type.

Stop

Click Stop to a service. The status column of the Services List section displays “Stopped”

in the status column for the affected service type.

Enable Startup

Click Enable Startup to specify that a service should be enabled on startup.

Disable Startup

Click Disable Startup to specify that a service should be disabled on startup.

Refresh

Click Refresh to refresh the values on this section.

Restart/Halt

Use the Restart/Halt section to either shutdown or reboot the SKM.

Figure 21 Viewing the Restart/Halt section

The following table describes the components of the Restart/Halt section.

Table 8 Restart/Halt section components

Components

Description

Restart/Halt

Select Restart to reboot the SKM, or Halt to shutdown.

NOTE:

Using the restart and halt functions terminates all active connections to the SKM.

Commit

Click Commit to perform the function selected in the Restart/Halt field.

IMPORTANT:

Remove any peripheral devices connected to the keyboard, mouse, and video ports on the SKM before

restarting. Use of these ports during the restart process can cause the process to hang.

Secure Key Manager

93

Advertising