2 connect the power supplies to ac power sources – HP Secure Key Manager User Manual
Page 29
Advertising
2.
Connect the appliance power supplies’ AC power connectors to two separate AC power sources
using the power cables provided (see
Figure 2 Connect the power supplies to AC power sources
3.
Use the strain relief clip from the hardware kit to secure the power cord to the rack.
4.
If this is a replacement appliance, pack the old appliance in the shipping materials for the
replacement appliance. You may need to remove the slide rails and null modem cable from the old
appliance to fit it in the box.
5.
Plug one end of the null modem cable into the serial port. Plug the other end into the laptop or PC
that you will use to configure the appliance.
Secure Key Manager
29
Advertising