HP Officejet Pro L7380 All-in-One Printer - Manual (Page 103)

To print the network configuration page from the control panel
•
If the device has a two-line display: Press the Setup button, select Network
Setup, select Print Network Settings, and then press OK.
• If the device has a color display: Press the Setup button, select Network, select
View Network Settings, select Print Network Configuration Page, and then
press OK.
Channel range definitions
The following table lists the 802.11 Wireless channel range definitions.
The first digit stands for Locale Number
Locale 0: Channels 1-11:
• high-power 802.11b
• low-power 802.11g
Locale 1: Channels 1-13:
• low-power 802.11b
• low-power 802.11g
Locale 2: Channels 1-14:
• low-power 802.11b
• low-power 802.11g
NOTE: 802.11g is not allowed on channel 14.
The second digit stands for Ad-Hoc
Compatibility Mode 0: Ad-Hoc connection status nominal
1: Ad-Hoc always appears connected
The third digit stands for Infrastructure Rate
Restriction 0: 802.11b or 802.11g
1: 802.11b only
The fourth digit stands for Ad-Hoc Rate
Restriction 0: 802.11b or 802.11g
1: 802.11b only
Configure network options
You can manage network settings for the device through the control panel as
described in the next section. Additional advanced settings are available in the
embedded Web server, a configuration and status tool you access from your Web
browser using an existing network connection to the device. For more information, see
Embedded Web server .
Change basic network settings
The control-panel options enable you to set up and manage a wireless connection and
to perform a variety of network management tasks. This includes viewing the network
settings, restoring the network defaults, turning the wireless radio on and off, and
changing the network settings.
Configure network options 99